How to Set Up Your CrankRup Hoist in Under 5 Minutes: A Step-by-Step Guide

After a successful hunt, lifting and hanging your trophy can be exhausting, especially if you’re hunting alone. That’s where hunting game hoist CrankRup really helps.

CrankRup is a product used for lifting and hoisting large animals, like deer, that have been hunted. It lifts game higher off the ground- up to 20 feet- making field dressing and processing easier. Quick to install in minutes, and is very portable and lightweight. 

In this guide, we’ll walk you through how to set up the CrankRup Big Game Hoist & Gambrel step by step.

Step 1: Choose the Right Location

Start by finding two sturdy, vertical trees (or similar posts) spaced 4 to 6 feet apart. These will serve as your anchor points for setting up the CrankRup system. Make sure they’re close to where your quarry is located so you don’t have to drag it too far.

Step 2: Position the CrankRup Bracket

Lean the CrankRup bracket against one of the trees. This will act as your main base for the pulley system. Crisscross the heavy-duty ratchet straps behind the bracket to help hold it in place and prepare it for secure fastening.

Step 3: Strap It Securely

Wrap the two straps around the tree and tighten them to secure the bracket. The straps should sit flat and tight against the bark, giving you a solid base to lift from. Double-check the stability before moving on.

Step 4: Set Up the Pulley and Winch

Now, prepare the pulley system. Attach the pulley block to your chosen overhead point—this could be between the two trees or a branch if available. Run the winch cable through the pulley. This setup allows for smooth, steady lifting without unnecessary strain.

Step 5: Attach the Gambrel

The gambrel, included with every CrankRup system, is used to support your quarry during the lift. Insert the gambrel through the hind legs of the animal, making sure it’s balanced. Then attach the gambrel to the pulley hook securely.

Step 6: Start Cranking

With everything connected, begin turning the winch handle slowly and steadily. The pulley system will do the heavy lifting, allowing you to raise even large animals like deer, elk, or bear without help. Always keep tension on the line to avoid slipping or uneven lifting.

Step 7: Process or Hang

Once your game is suspended at a workable height, you can begin processing or quartering. If you’re at camp, you can also hang the animal for cooling. Just be sure the straps and cable are under good tension before starting.

Bonus Use: Tree Stand Installation

One of the most overlooked uses of CrankRup is setting up ladder stands. Using the same system, you can lift and secure a tree stand safely into position without needing a second person. This makes CrankRup not just a hunting game hoist, but a multi-purpose safety tool for the field.

Tree Stand Safety Tips:

Every year, hunters suffer serious injuries from falls while setting up or climbing into tree stands. These accidents are preventable by following simple guidelines:

• Always remove and inspect all your equipment before using
• Buckle your harness securely
• Connect before your feet leave the ground
• Share your stand location for each hunt.

Get Yours Today

Don’t wait for back pain or a close call to remind you how important the right gear is. Make your next hunt safer, faster, and more successful with CrankRup.

👉 Visit www.crankrup.com or call (218) 780-9492 to order your Deer Hoist Sytem today. Your trophy deserves it—and so do you.